ASTM F394 TESTING FIXTURE A ring supports thin circular disks of a monolithic ceramic material, or a whisker- or particle-reinforced ceramic matrix composite. These disks are loaded by a smaller diameter concentric ring, a so-called ring-on-ring loading. Thickness and material of the sample determine the required diameter of the support ...
ASTM D7249 Testing Fixture This is a specialized version of the standard Long Beam Flexure Fixture and includes linear bearings alignment rods. It does not have an adjustable structure, as it has been designed for specific load and support spans. In test environments such as the control of production quality, ...
ASTM C1161 TESTING FIXTURE This method is used for the resistance to the bending test for the ceramic is mainly governed by ASTM C 1161. This particular ASTM standard defines specific exemplary dimensions, corresponding to a choice of three support spans, ie., 20, 40 or 80 mm, called Configurations A, ...
ASTM D790 Testing Fixture ASTM D790 are used for determining the flexural properties of unreinforced and reinforced plastics, including high modulus composites and electrical insulating materials utilizing a three-point loading system to apply a load to a simply supported beam (specimen). ASTM D790 can generally be applied to both rigid ...
ASTM D7264 Testing Fixture This test method determines the flexural properties (including strength, stiffness, and load/deflection behavior) of polymer matrix composite materials under the conditions defined. Procedure A is used for three-point loading and Procedure B is used for four-point loading. Procedure A—A three-point loading system utilizing center loading on ...
ASTM D393 Testing Fixture This test method covers the determination of the properties of flat sandwich constructions subjected to flatwise flexure in which the applied moments cause curvature of the sandwich facing planes. These tests may be conducted to determine the sandwich flexural stiffness, the core shear strength and shear ...